Installing the T504
Deploying the T504
T504 Strand Mount Concurrent AP with Integrated CM Installation Guide, 800-70610-001 Rev A
32
Administering Cable Modem Passwords
The parameters on the
Security Status
page allow you to change the CM login and
password, and/or restore the factory defaults.
1
Log into to the
Status
page as described in
Logging Into the CM Web Interface
Logging Into the CM Web Interface using a
2
Click
Security
in the left sidebar. The CM web interface displays the
Security
Status
page.
Figure 12. Security Status page
3
Ruckus Wireless recommends that you change the login and/or password as
follows:
a
Enter a new CM user ID in
Password Change User ID
.
b
Enter a new CM user password in
New Password
.
c
If you are changing the password, then re-enter the new CM user password
in
Re-Enter New Password
.
d
Enter the existing (before change) CM user password in
Current User ID
Password
.
4
Restore the factory defaults as follows:
•
Select the
Restore Factory Defaults
Yes
button to reset all the CM parameters
to the factory default settings after the next reboot.
•
Select the
Restore Factory Defaults
No
button to prevent a reset all CM
parameters to the factory defaults after the next reboot.
5
If you have made any changes on the
Security Status
page, then click
Apply
.
•
If you have selected the
Restore Factory Defaults
Yes
, then the CM reboots
and resets all CM parameters to the factory defaults.
DRAFT
