Ruckus Wireless MediaFlex 7111, Руководство пользователя

Страница: 66 / 72

60 Ruckus Wireless MediaFlex 7811 Access Point
Adapter Management
Adapter Management
After setting up and provisioning your 7111 adapter, the 7111 can be configured to be managed via the Web
user interface of the 7811. This adapter management enables a service provider to access and configure the
7111 without being physically local to the device. Adapter management also enables the 7111 to connect to
the firmware server via NAT through the 7811. As the 7111 does not have a publicly addressable IP address,
using NAT through the 7811 allows the adapter to receive updates without special access between networks.
N
OTE
–
When adapter management is enabled on the 7111 adapter, it is not possible to change the IP address of the
7111. To change the IP address of the 7111 adapter, adapter management must first be disabled.
To utilize adapter management, do the following:
N
OTE
– The following steps assume you have reconfigured your client PC to connect to the 7811.
1. Login to the wireless Web interface of the 7811.
2.
Go to Status :: Wireless .
3. Click the Video WLAN tab. In the Connected Devices table, note the Ruckus Adapter Management column.
This column has one of two values:
• STA WebServer : This indicates that the adapter is under adapter management.
• n/a : The 7111 is connected but not currently under adapter management. You must open a separate
browser window and enter the address of the 7111 to configure the adapter. To login to the 7111 and
enable adapter management, see
Enabling Adapter Management on page 62 .
Figure 39—Viewing the adapter management status of a 7111 via the 7811