manualshive.com logo in svg

Ruckus Wireless MediaFlex 7111, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless MediaFlex 7111 Скачать руководство пользователя страница 52

46

Ruckus Wireless MediaFlex 7811 Access Point

Rebooting the System

Rebooting the System

Two types of reboot are provided:

•

The

 Reboot Now 

button restarts the system. All the configurations that have been saved are preserved 

through the reboot. Any configuration changes made before the Reboot will be lost if they are not saved 
by clicking 

Update Settings

.

 

•

The 

Reset to Factory Settings

 button restarts the system with the factory default configurations. All 

previous configurations will be lost.

N

OTE

 – 

Make sure to save your settings before you reboot.

To reboot for either type, do the following:

1.

Go to 

Maintenance > Reboot/Reset

. The window of 

Figure 30

 appears.

Figure 30—Reboot Menu

2.

Do one of the following:

• Click 

Reboot Now

 to reboot the device while maintaining its current settings. During a reboot, the 

Dome LED on the top of the 7811 will momentarily go out, then light up again.

• Click the 

Reset Now

 link to reset the device to factory settings; thus, erasing any of your custom 

settings.

Содержание MediaFlex 7111









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды