Ruckus Wireless MediaFlex 7111, Руководство пользователя, Страница: 62 / 72

56 Ruckus Wireless MediaFlex 7811 Access Point
Packing List
Packing List
Each 7111 is supplied with the following:
• Ruckus Wireless MediaFlex 7111 Adapter
• AC power adapter
• Category 5 (CAT5) Ethernet cable
Placing the 7111 into Operation
The 7111 connects to the set-top box or other media receiver while communicating wirelessly with the 7811.
The 7811 already has a basic default configuration that can be used for auto-provisioning the adapter.
Note that normally the 7111 is pre-configured for plug and play operation in the IPTV deployment. You need
only follow these steps to place the 7111 into operation.
1.
Remove the 7111 adapter from the packaging and place it next to your set-top box.
2. Connect the AC power supply to the 7111 adapter and plug the other end into either a power outlet or a surge
protector that is plugged into a power outlet.
3. Connect the CAT5 Ethernet cable between the Ethernet port on the 7111 and the set-top box.
4.
Power on the set-top box.
Troubleshooting Setup
If you cannot see the video on your TV, follow these troubleshooting tips:
1.
Disconnect the 7111 power adapter.
2. Re-connect the 7111 power adapter.
3.
Connect the 7111 to the set-top box (or remote computer).
4. From the TV connected to the set-top box, check to see if you can watch IPTV channels.
5.
If not, turn off the set-top box.
6. Turn on the set-top box.
7.
Re-check the TV channel (or the remote computer).
8. If you still cannot connect, turn off all network devices.
9.
Power on the router and the access point.
10. Turn on the 7111.
11.
Turn on the set-top box.
12. Check the LED status lights to verify correct operation ( Figure 38 ).