RTW DigitalMonitor 10500X-PLUS, Руководство по эксплуатации

Страница: 188 / 251

RTW DigitalMonitor 10500X-PLUS 188
E 4.9. Numeric
Fig. E 4-20: The Numeric display in Multi Instrument 2 section, above in Program
Meter mode PPM, below in Program Meter mode ITU BS.1771
The Numeric display of the DigitalMonitor 10500X-PLUS in Program Meter
mode PPM reads out the maximum level, over counts and maximum SPL
values measured for both input channels.
With the
Program Meter mode ITU BS.1771 the Multi Instrument 2 will
return the numerical reading of the selected additional ITU bars I or/and L
(Integrated resp. Longterm see Chapter 4.2.1). When the longterm value is
displayed, additionally the running longterm measuring period is shown.
The Numeric display will show up in the Multi Instrument 2 provided it was
selected as Primary Function for this instrument in the Modify Preset menu.
Note:
Please refer to Chapter E 3.3 to learn about how to access the Modify
Preset menu. See Chapter E 5.2 for a detailed description.
See Chapter E 3.3 and E 5.2
E 4 Display Modes • E 4.9. Numeric
PPM: Over counts
PPM: Input channels
PPM: Maximum SPL value
PPM: Maximum level value
ITU BS.1771 mode:
Numerical readout of the
selected loudness bars
I
and/or L in dB LU or LKFS