RTW DigitalMonitor 10500X-PLUS, Руководство по эксплуатации

Страница: 221 / 251

RTW DigitalMonitor 10500X-PLUS 221
E 6 Installation
E 6.1 Safety information
Before installing and configuring the DigitalMonitor 10500X-PLUS, please
study the following safety information carefully and observe all the recom-
mendations to avoid injury and prevent damage to this product or any pro-
ducts connected to it.
To prevent possible electrical shock, fire, injuries and malfunctions, use this
product only as specified.
• Only qualified personnel should perform service procedures.
• Do not open the housing.
• Do not insert your fingers or any other objects into the housing.
• Do not cover the unit and do not place any objects or anything containing
liquids on it.
• Use only the supplied power cord and the certified power supply speci-
fied for this product and certified for the country of use.
• Connect and disconnect properly and use only connectors specified for
this product and fix them tight before use.
• To avoid fire or shock hazard, observe all ratings and markings on the
product. Consult the operating manual for further rating information before
making connections to this product.
• Do not apply a potential to any terminal that exceeds the maximum rating
of that terminal.
• The power cord of the external power supply disconnects the product
from the power source. Do not block the power cord or power supply; it
must remain accessible to the user at all times.
• Do not operate this product with cover plates or panels removed.
• Use only fuse type and rating specified for this product.
• Avoid exposed circuitry. Do not touch exposed connections and compo-
nents when power is present.
• Do not operate with suspected failures. If you suspect there is damage
to this product, have it inspected by qualified service personnel.
• Do not operate in wet/damp conditions.
• Do not operate in explosive atmosphere.
• Do not operate in dusty environments.
• Do not operate the unit without adequate ventilation.
• Turn off and disconnect the power supply immediately it the unit produces
unusual smells, noises or smoke, or if foreign substances (e. g. liquids)
or foreign objects enter the unit.
• Keep product surfaces clean and dry.
There are no user-serviceable parts in the DigitalMonitor 10500X-PLUS. Please
always have any necessary servicing performed by a properly qualified
technician. Never remove any parts from the unit and do not make any modi-
fications to the unit without the express written consent of RTW. Modifications
can cause both safety hazards and affect the unit’s EMI-CE conformity.
The DigitalMonitor 10500X-PLUS is designed for indoor use and may only
be operated with a power supply unit provided for it (see the Optional
Accessories in Chapter E 1.6.2).
E 6 Installation • E 6.1 Safety information