RTW DigitalMonitor 10500X-PLUS, Руководство по эксплуатации

Страница: 160 / 251

RTW DigitalMonitor 10500X-PLUS 160
E 3.7 Defining Power On Mode
You can define the display mode the DigitalMonitor 10500X-PLUS restarts
with after applying power. The available options are Mode1, Mode2 or Last
Mode, the last mode used before power disconnection.
E 3 Quick Start • E 3.7 Defining Power On Mode
Fig. E 3-4: The General menu of the DigitalMonitor 10500X-PLUS
Proceed as following:
1. From normal display operation, press and hold one of the MODE/SET
buttons until the unit changes to main menu mode.
2. Use Up or Dwn key to set the red menu focus on the General option and
enter the selection by pressing the Sel (SELECT) key.
3. Use Up or Dwn key to set the menu focus on the PowerOn Mode selection.
4. By pressing the Sel (SELECT) key repeatedly you can choose the desired
option. When chosing Mode1 or Mode2 the preset assigned to that mode
will be loaded the next time the unit is powered on. If the option Last
Mode is chosen instead, the unit will load the last active preset used
before power down.
5. Press Quit to leave the General menu and save the configuration change
with the Press SEL to SAVE option before returning to the normal display
mode.