background image

PROPRIETARY NOTICE

The product information and design disclosed herein were originated by and are 
the property of Telex Communications, Inc. Telex reserves all patent, proprietary 
design, manufacturing, reproduction, use and sales rights thereto, and to any 
article disclosed therein, except to the extent rights are expressly granted to 
others.

COPYRIGHT NOTICE

Copyright 2006 by Telex Communications, Inc. All rights reserved. 
Reproduction, in whole or in part, without prior written permission from Telex is 
prohibited.

WARRANTY NOTICE

See the enclosed warranty card for further details.

UNPACKING AND INSPECTION

Immediately upon receipt of the equipment, inspect the shipping container and 
the contents carefully for any discrepancies or damage. Should there be any 
discrepancies, notify factory service immediately. Notify the freight company and 
factory service of any shipping damage.

CUSTOMER SUPPORT

Technical questions should be directed to:

Customer Service Department
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 U.S.A.
Telephone: (800) 392-3497
Fax: (800) 323-0498
Factory Service: (800) 553-5992 (Lincoln, NE)

RETURN SHIPPING INSTRUCTIONS

Customer Service Department
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 U.S.A.
Telephone: (800) 392-3497
Fax: (800) 323-0498
Factory Service: (800) 553-5992 (Lincoln, NE)

Please include a note in the box which supplies the company name, address, 
phone number, contact person regarding the repair, the type and quantity of 
equipment, a description of the problem and the serial number(s)

SHIPPING TO THE MANUFACTURER

All shipments of product should be made via UPS Ground, prepaid (you may 
request a different shipping method from Factory Service). Any shipment 
upgrades will be paid by the customer. The equipment should be shipped in the 
original packing carton. If the original carton is not available, use any suitable 
container that is rigid and of adequate size. If a substitute container is used, the 
equipment should be wrapped in paper and surrounded by 4 (four) inches of 
excelsior or similar shock absorbing material. All shipments must be sent to the 
following address and must include the Proof of Purchase for warranty repair. 
Upon completion of any repair, the equipment will be returned via United Parcel 
Service or specified shipper, collect.

Factory Service Department
Telex Communications, Inc.
8601 Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service

This package should include:

Components

Description

Qty

90107772000

RVON-I/O Final Assembly

1

38110387

RTS Warranty Card

1

93507772000

RVON-I/O User Manual

1

8800102668

A/C Cord/ Conn 18 GA SVT 
(7ft) Belden #17250, Kent

1

Содержание RVON-I









































Отзывы: