rtd DM35218HR, Руководство пользователя

Страница: 45 / 56

RTD Embedded Technologies, Inc.
| www.rtd.com
45 DM35418HR/DM35218HR
User’s Manual
BDM-610010041 Rev F
6.5 BAR2: Digital to Analog Converter (DAC)
This Function Block is for a Digital to Analog converter. The DM35418 has eight DAC Function blocks, one for each of the eight DAC outputs.
The DAC0 output is associated with the lowest-numbered DAC Function Block, and DAC7 is associated with the highest-numbered DAC
Function Block. Each Function Block has its own clock, triggers, and DMA channel.
This Function Block is for a Digital to Analog converter. The DM35218 has four DAC Function blocks, one for each of the four DAC outputs.
The DAC0 output is associated with the lowest-numbered DAC Function Block, and DAC3 is associated with the highest-numbered DAC
Function Block. Each Function Block has its own clock, triggers, and DMA channel.
6.5.1 F
UNCTION
B
LOCK
R
EGISTER
M
AP
Table 23: Multi-Channel DAC Functional Block
Offset 0x03 0x02 0x01 0x00
H
ea
de
r
FB + 0x00 FB_ID
FB + 0x04 FB_DMA_BUFFERS FB_DMA_CHANNELS Reserved Reserved
D
AC
C
ont
rol
FB + 0x08 STOP_TRIG START_TRIG CLK_SRC MODE_STATUS
FB + 0x0C CLK_DIV
FB + 0x10 CLK_DIV_CNTR
FB + 0x14 Reserved
FB + 0x18 POST_STOP_CONVERSIONS
FB + 0x1C CONVERSION_CNT
FB + 0x20 INT_ENA (Conversion, Start, Stop, Error, Channel)
FB + 0x24 INT_STAT Reserved
FB + 0x28 CLK_SRC_GBL3 CLK_SRC_GBL2 Reserved
FB + 0x2C CLK_SRC_GBL7 CLK_SRC_GBL6 CLK_SRC_GBL5 CLK_SRC_GBL4
FB + 0x30 DA_CONFIG (Maskable register – 16-bit)
D
AC
C
ha
nn
el
FB + 0x34
CH_FRONT_END_CONFIG (Maskable register – 16-bit)
FB + 0x38 CH_FIFO_DATA_CNT
FB + 0x3C CH_INT_ENA CH_INT_STAT Reserved Reserved
FB + 0x40 Reserved (Checksum of DAC Data)
FB + 0x44 CH_LAST_CONVERSION
FIF
O
FB + 0x4C
CH_FIFO_ACCESS
6.5.2 M
ODE
_S
TATUS
(R
EAD
/W
RITE
, R
EAD
-O
NLY
)
Selects the current mode of operation and indicates its triggering status.
B[3:0]: Mode
o
0x04: Uninitialized. This is the power-on state. No converter initialization has taken place. Sampling is stopped, and all
counters are reset and the triggering state machine is reset. Transition to any of the other Modes will start converter
initialization (sampling will not start until initialization is complete).
o
0x00: Reset. Sampling is stopped. All counters are reset and the triggering state machine is reset.
o
0x01: Paused. Sampling is stopped, but the counters and triggering state machine maintain their state.
o
0x02: Go, Single-Shot. After converting the Post-Stop number of values, converting stops. The Mode must be set back to
RESET in order to convert more values.
o
0x03: Go, Re-arm. After converting the Post-Stop number of values, the triggering state machine is restarted. DAC data is
resumed from that last value sent.