RTD Embedded Technologies, Inc.
| www.rtd.com
iii
DM35418HR/DM35218HR
User’s Manual
BDM-610010041 Rev F
Revision History
Rev A
Initial Release
Rev B
Added DM35218 information, updated 68-pin IDAN connector pin out
Rev C
Updated 62-Pin IDAN connector pin out, changed all reference of A/D to ADC, changed all reference of D/A to DAC
Rev D
Added Section 3.3.5 LEDs
CN5 was removed from factory use only
Removed generic text from sections 6.3.17 and 6.4.16
Removed gain from ADC voltage formula
Removed Note from sections 6.3.17 and 6.4.16
Added table to section 6.4.16
CN3’s 3.3V load capability added to section 2.2
Add Clock Source description
Added CHn_FIFO_DATA_CNT register description to ADC and DAC Functional Blocks
Updated IDAN dimension drawing
Updated FFT Specifications
Rev E
40 MHz system clock frequency specified in section 6.1.7
In the digital IO section of Table 3, the symbols for the Input High Voltage and Input Low Voltage were swapped.
Rev F
Changed formatting to Section 6
Added sections
Updated power consumption
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”, cpuModule, dspFramework, dspModule, expressMate, ExpressPlatform, HiDANplus, “MIL Value for
COTS prices”, multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN, RTD, and the RTD logo are registered trademarks of RTD Embedded
Technologies, Inc (formerly Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104, PCIe/104,
PCI/104-Express and 104 are trademarks of the PC/104 Embedded Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed
by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not
be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
Copyright © 2016 by RTD Embedded Technologies, Inc. All rights reserved.
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”, cpuModule, dspFramework, dspModule, expressMate, ExpressPlatform, HiDANplus, “MIL Value for
COTS prices”, multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN, RTD, and the RTD logo are registered trademarks of RTD Embedded
Technologies, Inc (formerly Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104, PCIe/104,
PCI/104-Express and 104 are trademarks of the PC/104 Embedded Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed
by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not
be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
Copyright © 2016 by RTD Embedded Technologies, Inc. All rights reserved.
