RSP STC350, Руководство по эксплуатации продукта

Страница: 40 / 48

40 M0605-1 ver 2.5
4.5.2 Replacement of signal pins (STC350-6E only)
Replace a signal pin when the spring jams, or become bent.
Action Note
1 Power off Switch the power off and lock the
circuit breaker.
2 Remove signal pins Pull out the signal pins with a pair of
pliers.
NOTE! There are totally 20 signal
pins.
3 Replace signal pins Fit the new signal pins by pushing
them into the sleeves.
NOTE! The brass coloured part of
the signal pins should be pressed
fully into the sleeve.
4 Power on Unlock the circuit breaker and
switch the power on.
4.6 Complete service of tool changer
We recommend a complete service on tool changers to be carried out every 30 months. This will
ensure proper function and increase the lifespan of the tool changer considerably. We further
recommend that the maintenance shall be carried out by qualified RSP personnel. Please
contact us for a quotation.
The 5 year tool changer service at Robot System Products includes inspection and cleaning of
the full unit, replacement of all wear parts including sealings and signal pins.