2011/11/10 Ed 1.5
Setup and Programming manual for XT series GPRS
15 |
P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
Other XT setup with CMA600 keypad (Standalone ONLY)
Other setup (badges/codes, arming profile
s, etc…) must be set with the CMA keypad
GPRS error codes
Codes
Error
010
SIM card not detected/not inserted
043
Provisioning problem, contact cellular provider
047
Typographical error in APN Code, IP Address, or Port
132
SIM card not activated
255
Cannot connect to cell tower
GPRS LEVEL?
TEST IN PROGRESS
YES = END
GPRS LEVEL
x/5
RECORDING
DEVICES
PRESS PROGRAM
BUTTON OF DEVICE
ENTERING A NEW
DEVICE?
CLOSE THE PANEL
OPERATION
COMPLETED?
YES
YES
YES
During the GPRS Level test the Modem will boot and
attempt to gain access to the internet to post a Level out of
5 or an error Code that will help troubleshoot why it cannot
connect. To keep the keypad awake use any keys on the
keypad except the YES, ESC/NO, and CLR keys. This test
can take up to 5 minutes. Once the level or error has
posted press YES to continue in programming.
*For explanation of GPRS errors see bottom of page.
Videofied will require a 3/5 or better for reliable transmission
of Video alarms
Each device has a unique programming button. Please
reference the Installation Sheet for the device you would like
to program.
Before completing programming make sure that all tampers
are depressed by verifying that each devices indicator LED is
off.
(Device Type) #
Recorded
RADIO RANGE
TEST?
RF TEST
x/9
RADIO RANGE
TEST?
AREA ALLOCATION:
NAME LOCATION:
FUNCTIONAL
DEVICE TEST?
YES or ESC/NO
Press YES on Radio Range Test? You must allow the Radio
Range test to run for at least 30 seconds (9/9) before
stopping the test by pressing YES.
Press ESC/NO if first Radio Range Test was successful.
Use the arrow keys to select the proper area. Devices that
need an entry/exit delay should be set to AREA 1. Devices
that must be instant trigger should be AREA 2, 3, or 4. Press
YES.
*Note: If you are having issues pairing a device to the panel,
please refer to the troubleshooting section.
