2011/11/10 Ed 1.5
Setup and Programming manual for XT series GPRS
16 |
P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
Entering a Badge or Access Code for Arming/Disarming
After Initial programming has been completed, you are not able to arm and disarm the system until
you enter a user code or badge (the installer code cannot arm and disarm the system). Codes can
be 4-6 digits and the 4
th
digit must be 2 values higher or lower than any other code on the system:
Example: User code 1234, next code cannot be 1235, 1236, 1233, or 1232
– These are reserved for
Silent Duress and Audible Duress. The XT system can accept up to 19 Badges or Access codes in
any combination.
If you are entering any additional codes press YES. If you
have completed entering Badges and Codes press and hold
ESC/NO for 5 seconds to return to the main manu.
Use the keypad to name the badge or code or leave it blank
for the default name : ACCESS #.
Confirm the code by re-entering.
Enter a 4-6 digit user code or present a badge to the reader
for 2 seconds.
Press the
arrow to move to BADGES ACCESS CODES.
Enter the Installer code.
YES
YES
YES
YES
CONFIRM THE
CODE:
Badge
Presented
NAME OF BADGE:
ENTER A
BADGE/CODE
YES
YES
CODE NAME:
BADGE OR CODE
****
ENTRY COMPLETE
ENTER A
BADGE/CODE
BADGE OR CODE:
****
BADGES ACCESS
CODES
10/12/27 10:53
DISARMED LVL:3
