2011/11/10 Ed 1.5
Setup and Programming manual for XT series GPRS
32 |
P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
How to enable the External RF Antenna
The XTO 600/610 control panels have built in High Gain RF and GPRS antennas. The GPRS external
comes pre-activated and hooked up, while the RF antenna is hooked up but needs to be activated in
Configuration after you have completed initial programming. The following steps will walk you through how
to enable the High Gain RF antenna after initial programming.
Left or Right arrow until you see RADIO OPTIONS and press
YES. Use the arrow keys to change it to External and press
YES.
Enter the Installer Code
Press the
arrow to move to CONFIGURATION
Enter the Installer code.
Press the
arrow to move to ACCESS LEVEL #.
Press YES and use the
to move the level to 4
YES
YES
SITE
IDENTIFICATION
RADIO OPTIONS:
EXTERNAL
GENERAL
PARAMETERS
BADGE OR CODE:
****
CONFIGURATION
YES
YES
BADGE OR CODE:
****
YES
ACCESS LVL:
4
ACCESS LEVEL
3
10/12/27 10:53
DISARMED LVL:3
