Select switch position I, II or III for the required airflow and temperature output.
For positions II and III the temperature can be set by using the Temperature Setting Toggle (3)
Press the Toggle on the right hand side (+) to increase the temperature in 10 degree steps.
The digital display will initially indicate the target temperature and will then revert to the
current output temperature at the nozzle. Indicating arrows (2) will flash during the build up
and will stop when the target temperature is reached.
The nozzle temperature can also be reduced in 10-degree steps by pressing the left hand
side of the toggle (-); the same flashing indicators will be seen until the new target
temperature is achieved.
To turn the Heat Gun off it is recommended that it should be set to switch position I if it has
been used in switch position II or III at the higher operating temperatures. This allows the
element to cool prior to the final switching off and will prolong the life of the heating element.
To allow the Heat Gun to cool correctly, place in its self-standing vertical position on a flat,
non-slip, stable surface away from children and people who may be unaware it could be hot
137-165
137-193
137-159
Code
50-600
50-600
50-600
Temperature
Range
Digital Heat Gun
Digital Heat Gun
Digital Heat Gun
Description
240 V
110 V
230 V
Voltage
50
50
50
Hz
137-165
137-193
137-159
Code
300-550
300-550
300-550
Airflow
L/min
2000
1500
2000
Power
W
BS 1363/A - 3 plug 13 A -250 V
EN 60309-3 plug 16 A–4 h 100–130 V
Schuko - 2 plug 16A - 250 V
Plug
750g
750g
750g
Weight
06/05/2009 Version No. 1
3
Digital Heat Guns / UK
Operating Instructions
Decapado de pintura
Enmanguitado de cables eléctricos
Moldeado de tubos de PVC
Aplicación
Encendido de barbacoa
1, 2 ó 3
4
4
Tipo de
boquilla
No necesaria o 1
500-600C
250-300C
250-300C
Intervalo de calor
permitido
500-600C
Descongelación de la tubería de agua
Unión de láminas de plástico
No necesaria
3
250-300C
300-400C
1 - Boquilla reductora de 22 mm de diámetro
2 - Boquilla plana de 65 mm de largo x 15 mm de ancho
3 - Boquilla para protección de vidrios de 75 mm de ancho
4 - Boquilla reflectora de 70 mm de ancho
5 - Rasqueta triangular: puntera plana de 3 lados de 60 mm de largo,
longitud total de 225 mm
1
2
3
4
5
30
06/05/2009 Version No. 1
Accesorios para el decapador por aire caliente / ES
