Royal Prestige FP6000CT, Инструкция по использованию и уходу

Страница: 16 / 22

14
fReSCaPURe
™
6 Cut a 6 in. length from the 5 ft. of Blue Tubing
provided. Take this short piece of Blue Tubing
and insert one end into the Blue “Outlet” Collar
on Lid. Take the remaining Blue Tube end and
push it into the “Inlet” Collar on Monitor.
7
Before pushing the Blue Tubing (which is
attached to the Dedicated Drinking Water
Faucet)
into the “Outlet” Collar on Monitor,
determine whether it is necessary to shorten
Tubing. If so, shorten to desired length
before inserting.
8 Before pushing the Red Tubing (which is
attached to the Dedicated Drinking Water
Faucet)
into the Red “Outlet” Collar on Lid,
determine whether it will be necessary to
shorten Tubing. If so, shorten to desired
length before inserting.
9 Insert Monitor Cable Connector into Cable
Port located on Monitor.
10 Slowly turn cold water supply “ON” and
turn the Lever on Dedicated Drinking Water
Faucet downward. Water will begin filling the
System. Upon initial startup, the Monitored
Beauty Ring will begin blinking GREEN,
YELLOW and RED five (5) times before
continuing to blink GREEN, indicating peak
operational performance. Check that all hose,
clamp and Housing connections are tight
and do not leak.
11 When using your System for the first time, or
whenever a new Cartridge is installed, allow
the System to flush into the sink for fifteen
(15) minutes. This will expel trapped air and
condition the Filter Cartridge for normal use.
(This water may be used to water your plants.)
cONGRATulATIONs! your new frescaPure
™
system is now ready for use!
Give all tubes a gentle tug at the point
where they make a connection. this will insure they
are firmly seated and will not come out.
IMPORTANT
7
8
9
10
6a 6b
Blue
Red
Blue tubing
from faucet
Monitor