Roughneck Jackman Fusion Equipment, Руководство оператора

Страница: 3 / 52

JACKMAN FUSION EQUIP – ELECTROFUSION PROCESSOR OPERATORS MANUAL - REV 0
Page 1 of 48
SAFETY
•
Please read and understand this instruction manual before using the Roughneck Electrofusion
Processor .
•
Gas company safety standards and precautions should be followed at all times.
•
Do not use or store the Roughneck Electrofusion Processor where volatile gas concentrations may be
present.
•
Only properly trained and qualified personnel should operate the Roughneck Electrofusion Processor .
•
Treat electrical equipment as a potential source of ignition and follow proper practices for working in
an explosive atmosphere.
•
Power source and the Roughneck Electrofusion Processor must be located out of the trench.
•
For protection against the risk of electric shock, connect the Roughneck Electrofusion Processor to
properly grounded outlets only.
•
Only use fusion information supplied by the manufacturer of the fitting.
•
Under no circumstances should the Roughneck Electrofusion Processor enclosure be opened. All
warranties are void if the factory seal has been broken.
•
Before any fusion is performed, it is the responsibility of the operator to always verify that all the
information displayed is correct per the fitting manu
facturer’s recommendations for fusing the
attached fitting under the current ambient conditions.