USER X
MAIN.MENU
LANGUAGE
SETTINGS
STATUS
CONTROL
..................
ACTUATOR
Close limit control switch status
CLS.LIMI.0.
Open limit control switch status
OP. LIMI.0.
CLOS.TOR.0.
OPEN.TOR.0.
BLINKER.0.
Centronik Interface - Basic Settings - Mechanical Switch Mechanism
Test Feedback Switches
1) Confirm the torque or limit switches are functional by
monitoring feedback on the Centronik display during switch
testing.
The main power supply must be maintained during this
test procedure to ensure feedback via the Centronik
display.
It is not possible to test a switch that is already actuated by the
mechanism (for instance, at the end of travel limits). To ensure
that all switches can be tested correctly, move the
actuator to a mid-travel position and confirm that none of the
switches are active before beginning the test procedure.
2) Test position switches in both directions using a flat screwdriver
to turn LS TEST (CW for open, ACW for close). Feedback that the
switch state has changed will be seen on the Centronik display
interface.
The status text (top line) will show CLOSE.LIM. or OPEN LIM. and
the status LEDs will change from yellow (mid travel) to red or
green depending on user settings.
To confirm the normally closed control switch statuses, navigate
to the following menu within the Centronik software.
The end character displays the current status of the switch.
CLS.LIMI.X. indicates the switch has been made. As the control
switches are normally closed contact form, CLS.LIMI.X. should be
the status throughout travel until the closed limit has been reached.
CLS.LIMI.0. will then be displayed.
OPEN LIM
DEMO
A4
US
US
A4
US
A4
US
A4
A4
US
US
A4
US
A4
A4
US
11
A
Brand
