Centronik Interface - Basic Settings - Setting Tool
PASSWORD
ROTORKOO
Entering Configuration mode
To access configuration mode with the
Bluetooth
Setting Tool,
ensure the actuator is in Local or Stop mode and point the setting
tool directly at the IrCK LED.
Press to initiate communication. The IrCK symbol will be shown
when an input from the
Bluetooth
Setting Tool is registered by the
Centronik Control Module.
If the optional
Bluetooth
module is fitted, the Setting Tool will begin
communication through IrCK until a secure
Bluetooth
link has been
established. To confirm a
Bluetooth
connection has been successful,
the top left symbol on the Centronik display will change from IrCK
to and the
Bluetooth
Setting Tool button will illuminate solid
blue.
For IrCK communication, the Bluetooth Setting Tool must
be aligned to the IrCK LED at all times.
Entering the User Password
The password entry screen will be displayed with the default
password visible. Press to confirm this entry or use
to enter a different password. For instruction on
changing the user password, refer to PUB111-005.
Blank spaces will fill with whilst modifying the password text.
Once a valid password has been entered the display will show the
current active permission level with a symbol and text.
Press to return to the main menu.
Actuator settings cannot be modified in Remote.
The symbol shown to the left side of the display will reference the
following permission levels:
User level permission to provide basic access to settings
for commissioning and configuration purposes.
Super User level permission to provide access to more
advanced setting features.
Service level permission for Centork Engineer
access only.
USER x
PASSWORD
A4
US
US
A4
US
A4
US
A4
A4
US
US
A4
US
A4
A4
US
7
A
Brand
