7 - PRE-DELIVERY CHECKLIST
To the dealer: inspect the machine thoroughly after assembly to assure it is
functioning properly before delivering it to the customer. The following checklist
is a reminder of points to cover. Check off each item as it is found satisfactory or
after proper adjustment is made.
Gearbox oil level.
Guards and shields properly fastened.
Lubrication of grease fittings.
All hardware properly tightened.
All decals properly located and readable
(see fig. 2)
.
Blades properly installed and blade bolts & nuts tightened.
Overall condition (touch up scratches, clean and polish).
Test run, check for excessive vibration or overheating of bearings.
Operator’s Manual.
Review the operator’s manual with the customer. Explain the following:
Warranty.
Safe operation and service.
Correct machine installation and operation.
Daily and periodic lubrication, maintenance and inspections.
Troubleshooting.
Operational procedures and storage.
Parts and service.
Remove and fill out the Delivery and Warranty Registration form.
Give customer the operator’s manual and encourage the customer to read the
manual carefully.
IMPORTANT: warranty is not valid unless Delivery and Warranty Registration
Form in operator’s manual is completed in detail and mailed to the Company.
Model Number:
Serial Number:
Delivery Date:
Dealer’s Signature:
P
RE
-D
ELIVERY
C
HECKLIST
38
R
OTOMEC
G
REEN
-R
ITE
O
PERATOR
’
S
M
ANUAL
