CAUTION: be sure the tractor tire pressure is correct. It is important to strictly
follow the safety guidelines and instructions laid out in the tractor manual.
To attach the implement to the tractor do the following:
Back the tractor up to the Green-Rite in order to slip the tractor hitch arms over the hitch
pins bolted to the frame.
Turn off the tractor engine.
The lower hitch pins
(see fig. 11)
may be put in either of 2 positions (upper or lower)
depending on the tractor. Optional hitch blocks are available for use on tractors with non
standard three point hitches. Secure the two arms with the lynch pins. Tighten the
tractor arms side movement with either the sway chains or blocks to limit side swing to
2”-3”. Connect the top link, locking it in place with the top hitch pin. Adjust it so the
Green-Rite is as near parallel to the ground as possible. A 1 to 2 degree rearward tilt is
acceptable
(see fig. 12)
.
O
PERATION
23
R
OTOMEC
G
REEN
-R
ITE
O
PERATOR
’
S
M
ANUAL
1
2
3
4
6
7
5
Fig. 11
1. hopper
2. top hitch
3. seed cups
4. PTO shielding
5. lower hitch pins
6. rotor shaft
Parallel to the ground
Fig. 12
