3.07 - Front Wheels Adjustment
Upon request the machine can be adapted with two front depth control gauge wheels
(see fig. 7)
which are mounted on the side wheel support. These wheels have the same
function as the front roller, allowing the machine to follow the ground contour. They also
should be used with the tractor three point in the float position.
The depth is controlled by raising or lowering the wheels in the wheel supports attached
to the side of the Green-Rite. When using, be sure both wheels are in the same
position.
The rear roller is then adjusted so the machine is working as level and parallel to the
ground as possible.
3.08 - Hopper Adjustment
The Green-Rite hopper capacities are for the GRT-145 of 150 litre (5.29 cu.ft.), for the
GRT-165 of 170 litre (6 cu.ft.) and for the GRT-205 of 215 litre (7.6 cu.ft.). The hopper
runs the entire width of the machine. It has a continuously rotating ground driven
O
PERATION
16
R
OTOMEC
G
REEN
-R
ITE
O
PERATOR
’
S
M
ANUAL
1
2
3
Fig. 7
1. side plate
2. wheel support
3. front wheel
Fig. 8
Seed calibration handle