6 - TROUBLESHOOTING
6 - TROUBLESHOOTING
6 - TROUBLESHOOTING
6 - TROUBLESHOOTING
WARNING: be sure tractor engine is off, parking brake is locked, and key is
removed before making any adjustments.
Increase ground speed.
Position spreader so it runs
level or inclined slightly forward
toward the towing vehicle.
Slow ground speed.
Hopper too far backwards.
Narrow spread width.
Replace bolt.
Replace "R".
Replace ring or pinion gear.
Drive wheel bolt missing or
sheared.
Spinner disc "R" cotter pin
missing or sheared.
Broken ring or pinion gear.
Spinner disc does not
turn.
Set lever and gate opening to
the proper position (see section
3.06 - Operating Techniques).
Opening lever not
positioned correctly.
Non uniform spread
pattern.
SOLUTION
POSSIBLE CAUSE
PROBLEM
B
ABY
-H
OP
O
PERATOR
’
S
M
ANUAL
T
ROUBLESHOOTING
22
R
OTOMEC
Содержание Baby-Hop 100 Series
Страница 26: ...9 PARTS MANUAL Baby Hop 50 100 and 160 PARTS MANUAL 26 ROTOMEC BABY HOP OPERATOR S MANUAL...
Страница 30: ...Cut along this line Sender Fold here Place stamp here ROTOMEC spa Via Molino di Sopra 56 37054 Nogara VR ITALY...
Страница 32: ...ROTOMEC spa Via Molino di Sopra 56 37054 Nogara VR ITALY Tel 39 0442 510400 Fax 39 0442 510038 www rotomec com...