background image

8 - WARRANTY

8 - WARRANTY

8 - WARRANTY

8 - WARRANTY

The  Company  warrants  its  machine  from  defects  in  material  and  workmanship.  The
machines are warranted from the invoice date for the following periods.

1.

24 months

 for private use.

2.

12 months 

for commercial, contractual and public use.

3.

30 days

 for loan or rental.

This  warranty  is  valid  only  if  the  Warranty  Registration  Form  is  properly
completed and sent to the Company within 14 days of delivery along with copy of
the invoice.
This warranty is valid only if the machine is paid for in full.

The warranty coverage shall not be transferable from the first owner to any subsequent
owner.
This  document  is  the  only  warranty  for  this  machine,  any  other  promises,  express  or
implied other than those set forth herein are not applicable.
The  customer  can  not  request  any  special  provisions  or  changes  to  this  warranty
covering additional responsibilities or liability from the Company.

The  Company  determines  whether  the  warranty  covers  the  substitution  or  the
repairing of the machine or parts. 

The customer is responsible, in all cases, for expenses of lubricants, transportation, any
custom duties and applicable taxes.
The substitution or the repair of parts under warranty do not extend the length of said
warranty.
This  limited  warranty  does  not  apply  to  and  excludes  drivelines  and  driveline  related
safety  devices  (shear  pin  yokes,  shear  pins,  slip  clutches,  clutch  discs),  tires,  belts,
blades and other wear items.
At no time will the responsibility of the Company surpass the original purchase price of
the machine. The purchaser agrees, not to have any rights to any compensation from
the Company, including but not limited to, any eventual damages or accidents, loss of
profit,  loss  of  sales,  injuries  or  damages  of  any  kind  or  nature,  or  other  accidents  or
losses which could result.
If  during  the  period  covered  by  this  warranty,  the  machine  fails  to  perform  due  to
material  or  workmanship  defects,  the  purchaser  is  to  immediately  make  the  Company
aware  of  this  defect.  It  is  the  Company's  right  to  determine  if  the  machine  is  to  have
parts replaced, repaired or the machine returned.
The  Company  will  not  accept  any  returned  items  without  prior  express  written
authorisation.
This warranty does not cover cost of labour for the replacement of parts.
Misuse  or  use  of  this  machine  other  than  ways  outlined  in  the  operator's  manual  or
literature invalidates this warranty.
All obligations of the Company under this limited warranty shall be terminated if original
parts of this machine have been modified or altered in any way, the machine has been
repaired by unauthorised dealers, or when unauthorised spare parts have been used.

B

ABY

-H

OP

O

PERATOR

S

 M

ANUAL

W

ARRANTY

24

R

OTOMEC

Содержание Baby-Hop 100 Series

































Отзывы: