Rotomec Baby-Hop 100 Series, Руководство оператора

Страница: 19 / 32

specifications. The company will not claim responsibility for use of unapproved
parts and/or accessories and other damages as a result of their use.
15. Unauthorised modifications to the machine may impair the function and/or safety
of the machine and reduce its life. If equipment has been altered in any way from
original design, the manufacturer does not accept any liability for injury or
warranty.
4.02 - Service
Before beginning work:
1. apply a thick layer of grease to all exposed moving parts.
2. Apply a film of biodegradable oil in crevasses and corners in order to keep
corrosive material from rusting areas that are difficult to clean.
After each use:
1. be sure to thoroughly wash the machine without using excessive pressure
especially on the moving parts. It is particularly important to wash the implement
after using salt or fertiliser. This will help prevent the caustic chemicals in the salt
and fertiliser from destroying the metal of the machine.
2. Carefully dry the machine.
3. Apply a thick layer of grease to all exposed moving parts.
4. Apply a film of biodegradable oil in crevasses and corners.
After seasonal use it is important to perform the following for prolonged storage:
1. wash and dry the spreader carefully.
2. Inspect the spreader and replace worn or damaged parts. If corrosive material
has eaten under the paint, clean off the area with a wire brush and touch-up with
primer and paint.
3. Tighten all hardware.
4. Apply a thick layer of grease to all exposed moving parts.
5. Apply a film of biodegradable oil in crevasses and corners.
6. Cover the spreader from the elements in order to have it in perfect conditions for
the start of the next season.
NOTE: the gearbox has been filled with EP grade grease from the factory. The
grease never needs replacing unless internal work is done to the gearbox.
4.03 - Transport
CAUTION: do not tow tractor and spreader behind other vehicles. Use a properly
equipped trailer with heavy tie-downs for towing operations.
Before transporting:
1. always select a safe ground speed that is appropriate for the terrain.
B
ABY
-H
OP
O
PERATOR
’
S
M
ANUAL
M
AINTENANCE
19 R
OTOMEC