1.10 Limitation of liability
All information and instructions contained in this document have been
compiled in consideration of the applicable standards and regulations, the
latest developments in technology and many years of knowledge and
experience.
The hardware manufacturer assumes no liability for damage caused by:
■
Failure to comply with this document and all product-specific documents
and other applicable directives (see the chapters entitled “Security” and
“Stipulated use”).
■
Improper use / misuse (see the chapters entitled “Security” and “Stipu-
lated use”).
■
Insufficient invitation to tender, non-compliance with installation specifi-
cations and non-compliance with the application diagrams (where
available).
■
Increased contamination.
Claims made by third parties against the hardware manufacturer on account
of damage resulting from misuse or failure to comply with the obligation to
give instructions on the part of hardware dealers, window, door and balcony
door manufacturers and building element dealers or the builder are passed
on accordingly.
The obligations agreed in the delivery contract, the general terms and condi-
tions, the hardware manufacturer’s terms and conditions of delivery and the
legal provisions applicable when the contract was concluded shall apply.
The warranty only covers original Roto components.
We reserve the right to make technical changes as part of improvement to
performance characteristics and further development.
1.11 Preserving the surface finish
ATTENTION
Surface treatments may cause property damage.
Surface treatments (e.g. painting and varnishing) on elements can
damage components or prevent them from working properly.
u
For masking, only use adhesive tape that does not damage
the paint coats. Consult the manufacturer if in doubt.
u
Protect components against direct contact with the surface
treatment.
u
Protect components against contamination.
General information
Limitation of liability
12 ·
11 / 2020
·
IMO_539_EN_v0
Roto FS Kempton
Subject to change.
