Roto FS Kempton, Инструкция по установке, обслуживанию и эксплуатации

Страница: 80 / 88

7 Maintenance
CAUTION
Performing maintenance work incorrectly can lead to injuries.
Performing maintenance incorrectly can lead to injuries.
u
Ensure that there is sufficient space for installation before starting work.
u
Ensure that the installation site is clean and tidy.
u
Always have hardware adjustment and replacement work performed by a specialist company.
u
Secure the sash against unintentionally opening or closing.
u
Do not unhinge the sash for maintenance.
ATTENTION
Incorrect or improper testing may cause property damage.
Incorrect or improper testing of the hardware may cause the element to malfunction.
u
Have the hardware checked by a specialist company when installed.
u
If defects need to be remedied, have the element unhinged and remounted by a specialist company.
INFO
Maintenance work may require opening angles that exceed the nominally permitted opening angles of the
scissor stays. These opening angles must not be used in regular operation. For this reason, take suitable
measures (such as integrated opening restrictor or additional opening restrictor) to limit the sashes to the
maximum permitted opening angle.
INFO
The manufacturer must draw the attention of builders and end consumers to these maintenance instruc-
tions.
Roto Frank Fenster- und Türtechnologie GmbH recommends the manufacturer conclude a maintenance
agreement with their end users.
No legal claims can be derived from the following recommendations; their application is to be based on the specific
individual case.
Responsibility
Maintenance interval
□
 from page 81
Cleaning

from page 81
Clean hardware
□
Care  from page 81
Lubricate movable parts □
Lubricate locking points □
Performance test  from page 82
Check that hardware components are fitted securely □
Inspect hardware components for wear □
Check that movable parts work properly
□
Check that locking points work properly
□
Check ease of movement ■
Repair  from page 83
Retighten screws
■
Replace damaged components ■
□ = May be carried out by a specialist company or the end user
■
= Must be carried out by a specialist company
Maintenance
80 · 11 / 2020 · IMO_539_EN_v0 Roto FS Kempton Subject to change.