Roto FS Kempton Скачать руководство пользователя | Manualshive

Страница: 85 / 88

background image

9 Transport

9.1 Transporting elements and hardware

DANGER

Improper transport poses a risk of death!

Improper procedures for transporting, loading or unloading
elements may cause serious injuries and glass breakage as a
result of the elements swinging open, falling or becoming
overloaded.

u

Note the applicable accident prevention regulations.

u

Note force application points and reaction forces.

u

Prevent the sash from opening uncontrollably.

u

Avoid jerky movements.

u

Use suitable transportation means and protective devices.

u

Watch out for protruding components.

u

Transport heavy loads with two people and use suitable trans-
portation means (such as an industrial truck).

CAUTION

Trapped limbs may result in injuries.

The transported goods can skid, open, close or fall during trans-
portation tasks. This can result in limbs being trapped and
seriously injured.

u

Never reach near the scissor stays.

u

Close the sash after installation and secure it in place for
transport.

u

Wear safety gloves and protective footwear.

CAUTION

Physical strain may cause injury and damage to
health.

Carrying and lifting heavy loads for extended periods leads to
physical injury in the long term.

u

When carrying or lifting loads, maintain an ergonomically
correct posture. The maximum permissible load is 25 kg for
men and 10 kg for women.

Hardware is supplied to the specialist company as complete sets. The
components are packaged accordingly for each scope of delivery. The
instructions for safely transporting the hardware are described below.

Observe the following basic instructions when transporting hardware:

u

Transport larger scopes of delivery using appropriate transportation
means (such as industrial trucks).

u

Note the transport weight in order to select appropriate transportation
means.

u

Immediately check the delivery for completeness and transport damage
on receipt.

u

Only transport fully assembled windows with rebate clearance panelling.

INFO

Submit a complaint about any defects as soon as they are
identified. Claims for damages may only be made within the
reclamation period.

Use the following transportation means for support when transporting,
loading and unloading larger scopes of delivery:

Transport

Subject to change.

Roto FS Kempton

IMO_539_EN_v0

·

11 / 2020

· 85

«
...
83
84
85
86
87
...
»

Содержание FS Kempton

























































































Отзывы:

Нет отзывов

Похожие инструкции для FS Kempton

Бренд: Denver Страницы: 9

Бренд: Enerwave Страницы: 2

Бренд: inohom Страницы: 15

Бренд: ednet.power Страницы: 17

Бренд: Sonoff Страницы: 9

Бренд: Wemo Страницы: 13

Бренд: WOOX Страницы: 32

Бренд: Opro9 Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды