Roth BW/H Komfort, Руководство по установке

Страница: 62 / 172

BW/H Komfort
48000120_r
oth_bwh_k
omf
or
t.mon06304.ind
d
| 62
The remote control enables a parallely movement of the
heating curve (±15 K). In addition the heating curcuit can be
switched off via the remorte control. The remote control is
optional and it is not included in the full kit.
The heating curcuit can be switched off manually, if
•
the remote control is set to the position “heating curcuit
off“.
The heating curcuit switches off automaticly, if
•
the adjusted flow maximum temperature is exeeded
•
the outside temperature is higher than the adjusted
summer temperature.
•
the flow temperature sensor is defective.
Heating curcuit swichtes-off means that the heating curcuit
pump is deactivated and the mixer is closed.
A rapid heating process of the heating curcuit just take place
via a remote control by adjusting it to “rapid heat process“.
It signifies that the heating curcuit heats with the adjusted
maximum flow temperature.
Man.corr.:
set
arrangement/Heat.curcuits/heat.curcuit/expert/man.corr.
to „
YES
“
Adjustment channel for assigning the store temperature sen-
sor. The needed sensor must be assigned. Therefor an already
used sensor can be applied. Through this its original function
is not influenced.
The related remote controller correction
Hand-cor. is shown in the menu heating curcuit.
Sen.remote:
set
arrangement/Heat.curcuit/heat.curcuit/expert/sen.remote
e.g. „8“
factory setting: Sensor 10
B