Roth BW/H Komfort, Руководство по установке

Страница: 63 / 172

BW/H Komfort
48000120_r
oth_bwh_k
omf
or
t.mon06304.ind
d
63 |
1
3
2
6. Commissioning:
For first commissioning of the system, the main menu is
shown on the display. The adjustments of the controller must
perhaps be adapted to an existing system. The operation is
effected by 3 pushbuttons:
1. Selct language (
arrangement/adj.values
).
2. Set time (
arrangement/adj.values
).
3. Choose system (
Solar/options/system
).
4. Select options (
Solar/options
and/or
arrangement/op-
tions
).
5. In the submenu of the menu
Solar
and
arrangement-
check the controller’s parameters and possibly change
them.
6. Test the relais. For it switch the accordant relais manually
in the menu
manual op.
.
7. Finally switch-on the automatic operation for the relais
in the menu
manual op.
.
The new adjustments are automatically saved and are pre-
served even in case of power failure.
Please note:
The controller switches independantly into the menu
measu-
red values
or
message menu
if no adjustment or change
is made within 4 minutes. Please select and shortly press
the menu button
Return
in order to get back to the main
menu. In case of adjustments and security inquiries without
any change, the controller switches back to the respective
menu after 7 seconds.
System 1: 1 collector - 1 store
System 2: east-/west roof- collectors - 1 store
System 3: 1 collector - 2 stores
System 4: east-/west roof- collectors - 2 stores
System 5: 1 collector - 3 stores
System 6: east-/west roof- collectors - 3 stores
System 7: 1 collector - 4 stores
1. Set type of CS10
(
expert/Exp.-Sensors
).
2. Calibrate CS10
(
expert/Sensors
).
For the calibration CS10 has to be disconnected!
6.1 Commissioning the controller
6.2 Adjustment for operation with solar cell
forward
Set
(selection / confirmation)
backward
B