Rotex A1 BG Inline, Инструкция по установке и обслуживанию

Страница: 5 / 64

2 x Safety
FA ROTEX A1 BGe - 02/2014
5
2 Safety
2.1 Observing instructions
This instruction is the >>
Original Version
<< in your language.
Please read this manual carefully and thoroughly before pro-
ceeding with the installation or modification of the heating
system.
These instructions are intended for authorised and trained
heating and sanitation experts who have experience in the proper
installation and maintenance of heating systems and hot water
storage tanks by virtue of their technical training and knowledge.
This manual provides all the necessary information for instal-
lation, start-up and maintenance, as well as basic information on
operation and settings. Please go through the attached docu-
ments for a detailed description of operation and control.
All heating parameters needed for smooth operation are already
factory-set. Please refer to other relevant documents for infor-
mation on setting the control.
Relevant documents
– ROTEX A1 BG:
– For the operator
– Operating manual for the operator.
– ROTEX RoCon BF: Control System Instructions
The documents are included in the scope of supply.
2.2 Warning signs and explanation of symbols
Meaning of the warnings
Warnings in this manual are classified according into their se-
verity and probability of occurrence.
Special warning signs
Some types of danger are represented by special symbols:
Tightening torque
Order number
Notes related to order numbers are identified by the shopping
cart symbol
.
Handling instructions
Ɣ
Instructions on actions are shown as a list. Actions of which
the sequential order must be maintained are numbered.
Î
Results of actions are identified with an arrow.
2.3 Avoid danger
ROTEX condensing boiler conforms to the state-of-the-art and
meets all recognised technical requirements. However, improper
use may result in serious physical injuries or death, as well as
property damage. Install and operate only ROTEX condensing
boiler to avoid danger:
– as stipulated and in perfect condition,
– with an awareness of the safety and hazards involved.
This assumes knowledge and use of the contents of this manual,
the relevant accident prevention regulations and the recognised
safety-related and occupational medical rules.
2.4 Proper use
The ROTEX A1 may only be used for the heating of hot water
heating systems. It must be installed, connected and operated
only according to the information in this manual.
The ROTEX A1 may only be operated with the integrated circu-
lation pump and only in combination with a controller approved by
ROTEX.
Any other use outside the intended use is considered as im-
proper. The operator alone shall bear responsibility for any re-
sulting damage.
Proper use also includes observing the relevant maintenance
and servicing conditions. Spare parts must at least satisfy the
technical requirements defined by the manufacturer. This is the
case, for example, with original spare parts.
DANGER!
Draws attention to imminent danger.
Disregarding this warning can lead to serious injury or
death.
WARNING!
Indicates a potentially dangerous situation.
Disregarding this warning can result in serious injury
or death.
CAUTION!
Indicates a situation which may cause possible
damage.
Disregarding this warning can lead to damage to
property and the environment.
This symbol identifies user tips and particularly useful
information, but not warnings or hazards.
Electric power
Risk of burning or scalding.
Risk of poisoning
Danger of chemical burns
Pay attention to the stipulated tightening torque
(See chapter 12.7 "Tightening torque")