Communicator | 3.05
24
5.3.3.1 Resetting the Siren
NOTE:
After typing the text message, press the 'Send' button to send it to the Communicator.
In the procedures below, the
highlighted text
shows the SMS text to be sent.
•
Resetting the Siren of One House
!RX
> 'Send SMS' to the Communicator cell phone number.
!
= Start of message
R
= Reset
X
= Represents house number (can be any positive number from 1-64)
•
Resetting the Siren of Several Houses
!RX#X#X
> 'Send SMS' to the Communicator cell phone number
!
= Start of message
R
= Reset
X
= Represents house number (can be any positive number from 1-64)
#
= Sign separates between every house number
•
Resetting the Siren for All Houses
!RALL
> 'Send' to the Communicator cell phone number
!
= Start of message
R
= Reset
ALL
= Can be typed both in capital letters or small letters.
5.3.3.2 Resetting the Alarm
To reset all the alarms, send the following text message:
!C
> 'Send' to the Communicator cell phone number
!
= Start of message
C
= Communicator
5.3.3.3 Acknowledging a Message
If Message Repeat is enabled (refer to page 41), Communicator continues to send alarms until an
acknowledgement is sent.
•
Requesting a Response for Every Sent Text Message
!AON
> 'Send' to the Communicator cell phone number
!
= Start of message
A
= Acknowledgement
•
Canceling a Response for Every Sent Text Message
!AOFF
> 'Send' to the Communicator cell phone number
!
= Start of message
A
= Acknowledgement.
