19
Communicator
|
3.05
5.1.3 Responding to an Audio Alarm Message
The Voice Dial Out service transmits audio alarm message, via telephony, from Communicator to the
contacts entered in the Address Book (page 14). This section details the procedure to follow when an
audio alarm is received.
NOTE:
This service is provided by the Communicator ONLY if the Address book is properly defined
with contacts and the "VOICE" service selected per contact.
CAUTION Communicator only broadcasts its alarm message AFTER someone speaks into the
phone. Any word or sound is sufficient.
The following illustrates the sequence of
ALARM messages
:
"Good
<Morning / Afternoon / Evening>
farm <#> active alarm
.
Please, press 1 to listen
."
"House <#> has <#> alarm message<s>."
•
Alarm messages for the first house are played and then the following options are available:
•
Enter password (if acknowledging for the first time this call) and press
.
•
"Please wait… Reset for house
<#>
successful.
<Next Message / Goodbye>
."
•
Right after "Please wait" is heard,
press
to access the ALARM OPTIONS MENU.
"Entering alarm options for House <#>"
•
System reports alarm and then offers the following options:
NOTE:
Disabling alarms disables them until 12:00 PM the following day.
•
"Disable <confirmed / failed>!"
message is repeated and returns to
House Alarm Messages
NOTE:
If at any time an incorrect key is pressed or if nothing is pressed, the system repeats itself
three times and then ends the call.
NOTE:
To change the number of times that Communicator retries to contact a recipient, refer to
Message Options, page 25.
1
1
9
0
Acknowledge
Replay house
message
Play next house
message
End call
Replay alarm
message
0
1
9
Return to house
messages
Next alarm
message
Disable
