Ross Ultrix Acuity Скачать руководство пользователя страница 95

Страница: 95 / 115

Ultritouch

The 2RU rack mountable Ultritouch adaptable

system control panel allows you to control some

aspects of switcher operation using a DashBoard

interface.
The DashBoard interface on Ultritouch provides

control over aux bus source selections. You must

connect to the switcher from Ultritouch to be

able to control the switcher functions. Refer to

the Ultritouch documentation for information

on navigating the Ultritouch menu and

manually connecting to a device.

To Connect to the Switcher from

DashBoard

Ultritouch runs a simplified version of

DashBoard that is used to connect to the

switcher.

Note:

It is possible to connect to the switcher from a desktop

version of DashBoard, but the interface was designed for

Ultritouch and may not appear correctly on a desktop computer.

Refer to the Ultritouch documentation for

information on navigating the Ultritouch menu

and manually connecting to a device.

On Ultritouch, navigate to the Connected

Devices page.

Tap

Add

TCP/IP DashBoard

Connect/openGear Device Connect

Enter the IP address of the master switcher

control panel in the

Device IP/Hostname

field.

Tap

JSON

In the

Port

field, enter

5255

Tap

Add Device

A new

Acuity

device will appear in the list.

I may take a few moments to connect to the

switcher.

Tap the connected devices button to see a

table of all the devices Ultritouch is

connected to.

Tap

Acuity

Slot 0: Acuity

and tap

AUX

open that tab.

Ultritouch is now connected to the switcher.

Ultritouch Operation

The DashBoard interface on Ultritouch allows

you to assign sources to aux buses as well as

select sources on an ME bus.
The Ultritouch can display either an aux panel

or an ME bus. You can quickly switch between

the pages using the popout menu. Click on the

tab to access the menu.

Aux Panel

Aux Bank/Bus — select the aux bus you

want to assign a video source to.

Source Buses — select the type or source of

the video source you want to assign to the

aux bus.

Video Sources — select the video source

you want to assign to the selected aux bus.

Additional sources are available by tapping

the

buttons at the right of the row.

ME Bus

ME — select the ME that you want to select

a bus on.

Bus — select the bus on the ME that you

want to select a source on. Each button

shows the ME, bus, and currently selected

source.
• Top Line — the ME
• Middle Line — the bus on the ME (PGM,

PST, PGM B, PST B, KEY X V (Video), KEY

X A (Alpha))

• Bottom Line — the video source

currently assigned to that bus.

Source Type — select the type of source you

want to assign to the selected bus.

Ultrix Acuity Operation Manual (v10.1) — Ultritouch • 95

Содержание Ultrix Acuity




















































































































Результаты поиска

Содержание Ultrix Acuity

Отзывы:

Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 95 / 115

Результаты поиска

Содержание Ultrix Acuity

Отзывы: