Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 80 / 115

Description Command
Select a source for a box on a
MultiViewer.
1.
Select the type of source you
want to select and use the Src X
knob to select the source you
want to select.
2. Press MV and use the MV knob
to select the MultiViewer you
want to select a source on.
3. Press Box and use the Box knob
to select the box on the
MultiViewer that you want to
assign the source to.
MVBOX
Take the current selection in the
Sequencer to air and advance the
current selection to the next item in
the list.
Next
Take the current selection in the
Sequencer to air.
Read
Performs an ALL+ALL soft reset on the
switcher.
RESETALL
Resume a specific layer in a specific
frame-buffer.
1.
Press Layer ID and use the Layer
ID knob to select the layer you
want to use.
2. Press Buffer ID and use the
Buffer ID knob to select the
frame-buffer you want to use.
Resume
Store a switcher set.
1.
Press Disk and use the Disk knob
to select the location of the set
you want to store.
2. Press Set, enter the name of the
set you want to store, and press
Accept New Name.
SAVESET
Load a template to air on a specific
layer to the output channel selected
in the template. The Sequencer focus
moves to this item.
1.
Press Take ID and use the Take
ID knob to select the take id for
the template you want to load.
2. Press Layer ID and use the Layer
ID knob to select the layer you
want to use.
SeqIn
Take a template off-air.
•
Press Take ID and use the Take
ID knob to select the take id for
the template you want to load.
SeqOut
Description Command
Set the video format that you want the
switcher to operate in.
1.
Press Vid/Ref and use the
Vid/Ref knob to select VID.
2. Press Format and use the
Format knob to select the video
format you want the switcher to
operate in.
SETVIDMODE
Recall an existing basic preset Preset
ID on the device.
SpyderBPR
Recall a single predefined function key
Function Key on the device.
SpyderFKR
Recall a register Register ID at a
specific cue Script Cue on the device.
SpyderRSC
Load a template to air in a specific
frame-buffer and on a specific layer.
1.
Press Take ID and use the Take
ID knob to select the take id for
the template you want to load.
2. Press Layer ID and use the Layer
ID knob to select the layer you
want to use.
3. Press Buffer ID and use the
Buffer ID knob to select the
frame-buffer you want to use.
Take
Select what is included in the next ME
transition.
1.
Press the ME X button for the ME
that you want to set the next
transition for.
2. Select the key(s) and/or
background that you want to
include in the next transition.
TRANSINC
Select a new transition rate for an ME.
1.
Press the ME X button for the ME
that you want to set the new rate
for.
2. Press Num of Frames and use
the Num of Frames knob to
select the length of the transition
in frames.
TRANSRATE
Select a transition type for an ME.
1.
Press the ME X button for the ME
that you want to set the transition
type for.
2. Press Type and use the Type
knob to select the type of
transition you want to perform.
TRANSTYPE
Enter a manual RossTalk command. TypeInCmd
80 • Custom Controls — Ultrix Acuity Operation Manual (v10.1)