Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 72 / 115

Description Command
Reset the audio fader channel
assignments back to the default
setting of the audio fader map.
Reset Fader
Audio Mixer
Press Insert Event > Special .
Description Command
Audio channel assigned to
video sources are
automatically taken on-air
with the video source, but are
unchanged when the video
source is taken off-air.
AFV Hold
Turns off normal Audio Follow
Video (AFV) functionality.
Audio channel assigned to
video sources will not
automatically be taken on-air
with the video source. Audio
channel can still be taken
on-air manually. The AFV Off
functionality remains active
until the AFV On custom
control is run.
AFV Off
Returns the switcher to
normal Audio Follow Video
(AFV) functionality, after the
AFV Off custom control was
run.
AFV On
In normal mode, this event
allows you to access the levels
for the audio channel or group
you have assigned to that
button. In audio override
mode, it allows you to perform
audio only transition and
override the normal audio
follow video operation.
Assign Audio
Fade all audio channels on
either the program or preset
bus off. This can be useful for
quickly removing all audio
from either bus, or taking all
audio channels off-air after
you have performed an Audio
Memory Recall.
Audio All Off
Description Command
Turn an audio channel, or
group, off. This can be useful
if you want to take an audio
channel, or group, off-air at
once. You can use the Audio
Channel Off for either the
program or preset buses.
Audio CH Off
Turn an audio channel, or
group, on at the level it was
last on at, or leave it
unchanged as the channel is
already on-air. This can be
useful if you want to take an
audio channel, or group,
on-air at once. You can use the
Audio Channel On for either
the program or preset buses.
Audio CH On
Adjust the audio gain for a
group. (Lawo Ember+ only.)
1. Use the Group knob to
select the audio group
that you want to adjust
the gain for.
2. Use the Level knob to
select the new gain level
you want set for the
group.
Audio Gain
Recall a memory that has been
stored on the Audio Mixer.
This can be used to take a
number of audio channels
on-air at different levels all at
once. Refer to the
documentation that came with
your Audio Mixer for more
information on storing audio
memories.
Audio
Memory
Un-mute an audio channel, or
group. This is the same as
pressing mute on the Audio
Mixer.
Audio Mute
Off
Mute an audio channel, or
group. This is the same as
pressing mute on the Audio
Mixer.
Audio Mute
On
72 • Custom Controls — Ultrix Acuity Operation Manual (v10.1)