Ross Ultrix Acuity Скачать руководство пользователя страница 26

Страница: 26 / 115

Screen Captures

You can save a screen capture of the current

state of the menu to a USB drive inserted into

the control panel.

To Take a Screen Capture

Insert the USB drive into the USB port on

the control panel.

Navigate to the menu you want to capture.

On the Global Memory module, press

STORE

ALL

FADE RATE

The control panel beeps and a popup is

displayed. The file is stored as a bitmap on

the USB drive.

SoftPanel

SoftPanel allows you to run the menu system of

the switcher from a computer. The switcher

treats the SoftPanel interface as a satellite panel,

allowing it to control all aspects of the switcher

that the menu system of a satellite panel can

control.
The SoftPanel application uses the Oracle

VirtualBox to interface with the computer

hardware and operating system, and connect

to the switcher frame.

Tip:

You can also point your Google Chrome

™

browser to the

SoftPanel to access the Acuity Virtual Panel.

Keep the following in mind:

Keep the following in mind when using

SoftPanel:
• SoftPanel and the switcher must be on the

same version of software.

• Upgrading the switcher will not upgrade

SoftPanel. You must download a newer

version of the SoftPanel that is compatible

with the new switcher software.

• SoftPanel is an application running on a

Fedora

system on the Oracle

VirtualBox Virtual Machine. Refer to the

documentation that came with VirtualBox

for information on configuring the virtual

machine.

• Ross Video recommends using a static IP

address on the computer running SoftPanel.

• SoftPanel is treated like a satellite panel by

the switcher. All satellite panel permissions

apply.

• The Oracle

VM VirtualBox will prompt you

to download and install new versions of the

VM VirtualBox application.

• Not all menus and functionality are available

when using SoftPanel. Panel Diagnostics and

Calibration, ME Maps, and Positioner control

are a few of the menus and functions that

are not available.

To Install SoftPanel

The SoftPanel is imported as an appliance into

VM VirtualBox.
To install SoftPanel on your computer, you need

the following:
• Oracle

VM VirtualBox 5.1 or higher installed

on your computer

• Ross

SoftPanel-#.##.ova

file

If you have not already done so, download

and install the Oracle

VM VirtualBox on

your computer.

Launch VM VirtualBox.

On the Oracle VM VirtualBox Manager,

click

File

Import Appliance

Navigate to the

SoftPanel-#.##.ova

file

and click

Open

Click

Next

and follow the onscreen

instructions.

To Set Up SoftPanel

Run SoftPanel.

After SoftPanel loads, the Network Setup

menu is displayed.

In the Frame area, enter the IP address of

the LAN 1 port on the frame in the

Address

field.

Tip:

If you have already connected to the frame before,

you can select it using the Prev. Frame IPs knob.

In the Panel area, press

DHCP

to have the

IP address for the SoftPanel assigned, or

enter a static

IP Address

Subnet Mask

, and

Gateway

manually.

Use the

Panel ID

knob to select the Satellite

Panel ID that you want to use. You must

select the same Satellite Panel ID on the Web

Interface.

Press

Save

to store the new network setup

information.

Press

Yes

to reboot SoftPanel and apply the

new network settings.

26 • Menu System — Ultrix Acuity Operation Manual (v10.1)

Содержание Ultrix Acuity




















































































































Результаты поиска

Содержание Ultrix Acuity

Отзывы:

Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 26 / 115

Результаты поиска

Содержание Ultrix Acuity

Отзывы: