Ross NK-VRC, Руководство пользователя

Страница: 32 / 41

32 • Setting Up the NK-VRC NK-VRC User Guide (v05)
The recommended settings for Carbonite eXtreme systems are:
• Switch Retries Enabled : enabled
• Switch Retry Delay : 40 milliseconds
5. Click
Send Configuration
(see “ Sending the Configuration to a Device ” on page 21).
Setting Up Machine Control
If the routing switcher system uses a machine control routing switcher to provide reciprocal switching of RS-422
signals, the remote control panels and NK-VRC need to be set up to handle these switches. Machine control must be
enabled in the remote control panels and the NK-VRC, and the router level used for machine control must match
across all devices.
To set up machine control in the NK-VRC
1. In DashBoard , open the NK-VRC interface.
2. In the Physical Map tab, use the MC Level list to select the value that corresponds to the level set in the
machine control routing switcher. The default level is 8.
3. Click
Send Configuration
(see “ Sending the Configuration to a Device ” on page 21).
Saving the NK-VRC Configuration
Parameters on the various pages of the NK-VRC interface can be stored to a file. Multiple such files can exist,
corresponding to different configuration pre-sets. These pre-sets can subsequently be accessed through the
File
Navigator .
For More Information on...
• adding a directory to the File Navigator, refer to the section “ File Navigator ” in the DashBoard User Guide .
To save a new configuration file
1. Open or select the NK-VRC interface that contains the configuration to be saved.
2. Click
Save As
( ) to save the current configuration to a file.
The Export NK-VRC to file window opens.
3. Navigate to the folder where the configuration is to be saved.
The default location in Windows is Documents .
4. Click
Save
.
To save changes to an open configuration file
1. Open or select the NK-VRC interface that contains the configuration to be saved.
2. Click
Save
to save the current configuration.
To open a saved configuration file
1. In the File Navigator section, navigate to the configuration file to be opened.
2. Double-click on the icon for the saved configuration.
The selected configuration file is opened in the NK-VRC interface.