Ross NK-VRC Скачать руководство пользователя

Страница: 31 / 41

NK-VRC User Guide (v05)

Setting Up the NK-VRC • 31

Setting Up the Log for Diagnostics

The

Log

tab captures T-Bus events for diagnostic purposes.

Figure 4.12 Log tab

The

Log Enabled

option will enable/disable the log feature. This should be left disabled unless directed by Tech

Support.

Setting Up Carbonite eXtreme Compatibility

Use the

Compatibility

tab to configure the Carbonite eXtreme compatibility settings.

To configure the Carbonite eXtreme compatibility settings

1. In

DashBoard

, open the NK-VRC interface.

2. Select the

Compatibility

tab.

3. In the

Startup Delay (s)

field, enter an amount of time in seconds that the NK-VRC will wait before refreshing

the connected routers to its known status on startup.

This allows the Carbonite eXtreme enough time to boot before the NK-VRC sends refresh switch requests.

Recommended settings are:

• 0 seconds for non-Carbonite eXtreme systems.
• 120 seconds for Carbonite eXtreme systems.

4. Select the

Switch Retries Enabled

check box to retry switch requests when a switch response has not been

received.

If selected, enter an amount of time in milliseconds in the

Switch Retry Delay (ms)

field that the NK-VRC

will expect a response.

The recommended settings for non-Carbonite eXtreme systems are:

•

Switch Retries Enabled

: disabled

•

Switch Retry Delay

: 20 milliseconds

Содержание NK-VRC










































Результаты поиска

Содержание NK-VRC

Отзывы:

Похожие инструкции для NK-VRC

Бренды по названию

Популярные бренды

Ross NK-VRC, Руководство пользователя

Результаты поиска

Содержание NK-VRC

Отзывы:

Похожие инструкции для NK-VRC

Бренды по названию

Популярные бренды