manualshive.com logo in svg

Ross NK-VRC, Руководство пользователя

Поделиться
Скачать
Ross NK-VRC Скачать руководство пользователя страница 17

NK-VRC User Guide (v05)

Physical Installation • 17

Connecting the NK-VRC to a Power Supply

The NK-VRC is powered using the power supply provided. This power supply connects directly to the AC mains 
supply.

To connect the NK-VRC to a power supply

1. Connect the power supply provided to the 

POWER

connector on the rear panel of the NK-VRC.

2. Connect the cable from the power supply to a suitable AC mains supply.

Checking the Software Version of the NK-VRC

The NK-VRC must operate with other devices that have v2.00 software or later. Software may be updated using 
DashBoard. To learn what is the latest software version, contact Ross Video Technical Support.

To launch DashBoard

1. Ensure that you are running DashBoard software version 8.0 or higher.

2. Launch DashBoard by double-clicking its icon on your computer desktop.

To check the software version of a device using DashBoard

1. Connect to the NK-IPS. Refer to the 

NK-IPS User Guide

.

2. In the 

Basic Tree View

 section, double-click the device for which you want to check the software version.

3. In the 

Device Details

 section of the interface, view the 

Version

 field for the current software version.

Warning

 — Ensure that the AC mains supply complies with the PSU specification before making the 

connection.

Warning

 — An earthed neutral mains supply and residual current device is recommended for safe 

operation.

Содержание NK-VRC










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды