manualshive.com logo in svg

Ross NK-VRC, Руководство пользователя

Поделиться
Скачать
Ross NK-VRC Скачать руководство пользователя страница 15

NK-VRC User Guide (v05)

Physical Installation • 15

Physical Installation

This chapters provides an overview of the front and rear panel features, and instructions for physically installing the 
NK-VRC.

Unpacking the Equipment

On receiving your NK-VRC, check the contents against the packing list. Make sure that all equipment itemized on 
the packing list is present and that there are no signs of damage before you start installing the NK-VRC into your 
system.

If anything is missing or damaged, contact your Ross Video office immediately to obtain the correct warranty 
service procedures. This ensures prompt assistance, minimal turnaround time, and avoids any freight issues.

We recommend that the equipment be installed by qualified and experienced personnel, to any relevant standards 
and approvals.

General

These installation guidelines assume the following:

• The relevant NK Series equipment has been installed into a ventilated rack frame. The relative humidity in the 

environment of the equipment should be < 70% (non-condensing).

• The routing switcher system has been well planned and designed. Consideration must be given to inputs and 

outputs across multiple router levels, and typical operating scenarios for breakaways.

• Correct IP addresses have been assigned to the equipment, where required.
• The routing switchers are connected to the appropriate sources and destinations.
• All NK Series equipment connected in the routing switcher system have software v2.00 or later. Software 

updates are available through Ross Video Technical Support.

• If resource management is to be used, the external resources are installed and operational as per the manufacturer 

instructions.

The NK-VRC provides phantom power via the 

T-Bus

connector to certain other NK Series devices (NK-GPI, 

NK-SCP/A, NK-SCP/K2). The NK-VRC does not receive power via the 

T-Bus

connector.

Hardware Overview

This section provides a general overview of the NK-VRC hardware components.

Front Panel Overview

The NK-VRC front panel includes features for monitoring communications.

Figure 3.4  NK-VRC — Front Panel

NK-VRC

Virtual Routing Core

A

B

C

D

RESET

Содержание NK-VRC










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды