Ross NK-VRC, Руководство пользователя

Страница: 26 / 41

26 • Setting Up the NK-VRC NK-VRC User Guide (v05)
To open the Edit Source/Destination Mappings dialog box, click the Edit button in the Physical Map tab.
Figure 4.9 The Edit Source/Destination Mappings dialog box
Table – selects whether to edit destinations or sources. The Destinations and Sources radio buttons are also
selectable. By default, this dialog box will open with the already selected Destination or Source page number from
the Physical Map tab.
Select All – select this check box to select the Class and all level ( L1 to L32 ) check boxes.
Class – use this check box to select the class information to populate the selected area of the mapping table.
L1 to L32 – use these check boxes to select the level(s) to populate with mapping information.
Range – use the Start and End text boxes to enter a cell range in which to enter mapping information.
Value – use this text box to enter a value to use in the first virtual number cell or select the Blank check box to
delete the information contained in the selected cells
Increment – if a Value has been entered, select this check box to increment the number in steps of one down the
range. To keep the number the same down the range, do not select the check box.
Copy – click this button to copy the selected cells in the mapping table to a clipboard.
Paste – click this button to paste information from a clipboard to the selected level(s) in the mapping table.
Fill – click this button to close the dialog box and update the mapping table to reflect the changes.
Cancel – click this button to close the dialog box without applying any changes.
Editing a Mapping Table
Once the Edit Source/Destination Mappings dialog box is open, a range of functions can be performed anywhere
in the mapping table, regardless of the point of entry.
The Edit Source/Destination Mappings dialog box automatically selects the type of page (in Figure 4.10 ,
Sources ) and selects the levels (in Figure 4.10 , levels L2 and L3 ). It suggests a Range to enter, based on the virtual
numbers at the left-hand side of the mapping table, and suggests a Value to enter.
If a range of cells is selected in the mapping table before clicking the Edit button, the levels and virtual number
range of the selected cells are shown in the Edit Source/Destination Mappings dialog box (see Figure 4.10 ).

All of the cells on the page can be selected by clicking inside the table and then pressing Ctrl + A .

The pages will only display 100 cells at a time, but the Range can start at 1 and end at 1000. Using the full range
of cells is handy when clearing tables.