ROSIERES 4040 DB AUS, Руководство по эксплуатации

Страница: 16 / 20

1 6
The electrical connection of the appliance must be carried out by a person competent to do
so.
A suitably protected fuse is required for this appliance which must incorporate a double pole
isolating switch. The appliance must be connected to a suitable earth. If the use of an "RCD"
device is contemplated "Nuisance Tripping", to which all cooking appliances are prone, should
be carefully considered.
Connection to the cooker terminals
- remove the back panel by taking out the two fixing screws and slipping it off,
- pass the supply cable through the cable clamp and proceed to connect it in accordance with
the chart. See pg. 17.
Attention should be noted to the shorting links used, for example, in a single phase operation
to link terminals 1, 2 & 3 live and to link terminals 4 & 5 neutral.
Failure to utilise the links correctly may result in partial operation of the appliance functions.
Having checked the terminals are fully tightened, proceed to tighten the cord clamp and replace
the back panel.
WARNING : THIS APPLIANCE MUST BE EARTHED.
ELECTRICAL CONNECTION