ROSIERES 4040 DB AUS, Руководство по эксплуатации

Страница: 13 / 20

1 3
WARNING :
DANGER - Before starting any work on the appliance the mains supply must be
switched off.
HOW TO REMOVE THE CAST IRON PLATE
- Unscrew the upper fixing screw of the Left Hand Trim
- Remove the screws at the rear of the splash back
- Remove the Griddle Plate
- Lift and Pull the Cast Iron Plate off the appliance.
Note : when re-fitting the plate ensure that it is properly located on the rear of the cooker.
HOW TO REMOVE THE HOB PANEL - Note : before removing the hob it is necessary to
remove the Cast Iron Plate.
- Remove the pan supports, burners and burner caps, proceed to remove the eight screws
holding the four burner supports to the hob panel
- Unscrew the upper fixing screw of the Right Hand Trim
- Unscrew the two fixing screws at the rear of the cooker
- Lift and pull the hob forward from the cooker
Note : When re-fitting the Hob ensure that it is properly located on the rear of the cooker.
CHANGING THE OVEN LIGHT - The lamp and its housing are made of a material which can
withstand very high temperatures. To change a defective lamp, simply remove the glass
housing, replace the lamp with an identical one and refit the portective glass housing.
ACCESSIBILITY