Rosemount 2120 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 72

background image

Reference Manual

00809-0100-4030, Rev DA

June 2007

Rosemount 2120

A-10

Code

Options

Calibration Data Certification

Q4

Certificate of functional test

Material Traceability Certification

Q8

(1)(2)

Material Traceability Certification per EN 10204 3.1B

Special Procedures

P1

(11)

Hydrostatic testing

Overfill

U1

(12)

DIBt/WHG Overfill protection

Tag Plates

ST

Tag plate SST engraved plate (maximum 16 digits)

WT

Tag plate hand written waxed paper (maximum 40 digits)

Typical Model: 2120 D 0A C 1 I1 A A Q8 ST

(1) Only available for wetted parts.
(2) Not available for hand polished wet side.
(3) Halar/PFA copolymer coating is not available on threaded options.
(4) Only available of BSPT and NPT threaded process connection code 0A, 0D, 1A, and 1D as standard.

Other upon request.

(5) Other process connections available upon request.
(6) Rosemount 2120 IS Namur Vibrating Fork Level Sensor Models 2120***C**I** has demonstrated proven

reliability. It is manufactured and supported in a manner suitable for applications up to SIL 2 of IEC 61508 as a
Type B Safety Related Subsystem when configured as a high level alarm in conjunction with a Namur Barrier.

(7) See Appendix B: Product Certifications. E5 includes G5 requirements. G5 is for use in unclassified, safe area

locations only.

(8) See Appendix B: Product Certifications. E6 includes G6 requirements. G6 is for use in unclassified, safe area

locations only.

(9) Only available with stainless steel material of construction D and glass nylon housing A and D.
(10)Minimum length available for connection

3

/4-in. threaded is 3.8-in. (95 mm), for 1-in. threaded is 3.7-in.

(94 mm), for flanged is 3.5-in. (89 mm) and Tri-Clamp is 4.1-in. (105 mm). Maximum length up to 118.1-in.
(3000 mm) except for Halar/PFA copolymer coating and hand polished process is 39.4-in. (1000 mm).
Example: Code E1181 is 118.1 inches. Code M3000 is 3000 millimeters.

(11)Option limited to units of no more than 59.1-in. (1500 mm) extended lengths.

Option not available for Halar/PFA coating.

(12)Option not available for Stainless Steel housing code S and T.

«
...
44
45
46
47
48
...
»

Содержание 2120









































































Отзывы:

Нет отзывов

Похожие инструкции для 2120

Бренд: Keithley Страницы: 55

Бренд: Weller Страницы: 9

Бренд: T&D Страницы: 2

Бренд: T&D Страницы: 2

Бренд: YOSensi Страницы: 26

Бренд: YOSensi Страницы: 26

Бренд: Nagano Keiki Страницы: 25

Бренд: Fluke Biomedical Страницы: 28

Бренд: VOLTCRAFT Страницы: 108

Бренд: Wetekom Страницы: 22

Бренд: Keller Страницы: 8

Бренд: Velleman-Kit Страницы: 9

Бренд: Camlab Страницы: 28

Бренд: Reed Instruments Страницы: 12

Бренд: WIKA Страницы: 56

Бренд: Hanna Instruments Страницы: 2

Бренд: Omega Страницы: 2

E INSTRUMENTS 1500

Бренд: sauermann Страницы: 170

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды