Rose electronics UltraView, Инструкция по установке и эксплуатации

Страница: 24 / 52

This setting is available with PC keyboards only and is used to adjust the
user preference of the way the keyboard acts when holding a key down to
repeat a key. The rate is the speed at which the keys are sent in
keys/second.
To change the typematic rate, press enter while typematic rate is
highlighted. An
input new value
box appears. Use the numeric keys to input
a new value from 0 to 31 keys/second and hit enter. The input box
disappears and the new value is then shown in the typematic rate field.
Please note that PC keyboards do not have a linear rate in keys/second.
Refer to Table 3 to get the exact rate.
Table 3. Typematic rate
Rate
Keys/sec Rate
Value Rate
Keys/sec Rate
Value Rate
Keys/sec Rate
Value Rate
Keys/sec Rate
Value
30.0 31 15.0 23 7.5 15 3.7 7
26.7 30 13.3 22 6.7 14 3.3 6
24.0 29 12.0 21 6.0 13 3.0 5
21.8 28 10.9 20 5.5 12 2.7 4
20.0 27 10.0 19 5.0 11 2.5 3
18.5 26 9.2 18 4.6 10 2.3 2
17.1 25 8.6 17 4.3 9 2.1 1
16.0 24 8.0 16 4.0 8 2.0 0
Configure system: Typematic delay
This setting is available with PC keyboards only and is used to adjust the
user preference of the way the keyboard acts when holding a key down to
repeat a key. The delay determines how long after pressing a key will it start
to repeat. There are four possible settings: slow (1 second), medium (750
msec.), fast (500 msec.), and fastest (250 msec.).
To change the typematic delay, press enter while typematic delay is
highlighted. A
typematic rate input box
appears. Use the arrow keys to
select slow, medium, fast, or fastest and hit enter. The input box disappears
and the setting selected is now shown in the typematic delay field.
18
ULTRAVIEW INSTALLATION AND OPERATION MANUAL