ULTRAVIEW EXPANSION
The UltraView F chassis can be expanded with expansion card model
UVK-4U to contain up to 16 ports. The card is installed by opening the
chassis and installing the card according to the instructions provided.
UltraView units and other switches (such as the ServeView) can be chained
together to expand your system to connect up to 256 CPUs. When used like
this, the unit attached to the Monitor/Keyboard/Mouse connector via the
MKM adapter cable becomes the master unit. All other UltraViews or
ServeViews are slave units that provide computer expansion only and
perform no control functions.
Slave units can be added to your UltraView system as you need them. For
each slave you add to the system, you gain n-1 additional ports, where n is
the number of ports on the slave unit. As Figure 4 shows, adding a single
8-port slave to an 8-port master unit gives you 15 ports. Adding a second
8-port slave unit will give you 23 ports, and so forth. Using 8-port units only
the maximum number of computer is 64. If you use 16-port units, you can
connect up to 256 computers. You can mix 2, 4, 8, 12, and 16 port units
together, but the number of ports on each slave unit should be equal.
Two configuration settings – units and width determine exactly how the
CPUs are numbered. Please refer to the the units and width on page 16 and
17 for more information.
10
ULTRAVIEW INSTALLATION AND OPERATION MANUAL
CPU 1
1
2
3
4
5
6
7
8
CPU 8
CPU 9
CPU 10
CPU 11
CPU 12
CPU 13
CPU 14
CPU 15
MONITOR
KEYBOARD
MOUSE
Master Unit
Slave Unit 1
MKM
SWITCH TO SWITCH
CPU
ADAPTER CABLES
MO N I TO R / KE Y B O AR D /M O U S E
R S 2 3 2
P O W E R
1 7 VA C C T
2
6
1
5
4
8
3
M A D E I N U S A
7
7
MO NI TO R / KE Y B O AR D /M O US E
R S 2 3 2
P O W E R
1 7 VA C C T
2
6
1
5
4
8
3
M A D E I N U S A
7
7
Figure 4. Expansion system layout
Содержание UltraView
Страница 2: ......
Страница 50: ......
Страница 51: ......
Страница 52: ...ELECTRONICS 10707 STANCLIFF ROAD n HOUSTON TEXAS 77099 n TEL 281 933 7673 ...