manualshive.com logo in svg

Rose electronics UC1-1X16U/E, Инструкция по установке и эксплуатации

Поделиться
Скачать
Rose electronics UC1-1X16U/E Скачать руководство пользователя страница 57

 

ULTRACONSOLE USERS MANUAL 

51 

 

When complete, the system returns you to the serial options menu. 
Wait at least 15 seconds before restarting the UltraConsole after 
choosing option 4 or 5 for the program to propagate to the other cards 
in the system. 

 
Option 6. Reset to Factory Defaults (This CPU card only) 

NOTE: Before resetting any CPU card to factory defaults, note the 
starting computer number listed on the Serial menu, Option 1. When 
resetting a CPU card to factory defaults, this number will be set to one 
(1) and must be changed back to the original value by using option 1 
and then saved using option 7.  In an expanded system, there cannot 
be two different UltraConsole switches in the system with the same 
starting computer number.   
Selecting option 6 restores the CPU card to its original factory 
configuration. The following message appears: 
 
 
When the factory defaults have been restored, the following message 
is displayed: 
 
 
 
The serial options menu is then displayed, indicating that this CPU 
board has been reset to the factory defaults.  
 

Option 7. Save Changes 

This option saves the configuration changes made in option 1 and 2 
only to the CPU card where the serial cable is attached. All users 
should be logged off from all systems prior to saving any configuration. 
To save the configuration changes, press 7, and the following message 
appears: 
 
 
When the flash memory is updated, the following message is 
displayed: 
 
 

 
Option 8. Exit (Restart the Unit) 

Selecting option 8 exits the serial option menu. The UltraConsole 
switch will reinitialize and the diagnostic check will run. After the 
diagnostic check finished, the Unit is ready to use with its new 
configurations.  If there are more configurations needed, hit the space 
bar within 5 seconds and the serial menu will be brought back up to 
use.

Flash programming . . . . . . . . . . . . . . . . . . . .  

Reset to default successful

Flash programming . . . . . . . . . . . . . . . . . . .  

Configuration saved successfully 

Содержание UC1-1X16U/E

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды