Rose electronics UC1-1X16U/E, Инструкция по установке и эксплуатации

Страница: 31 / 80

ULTRACONSOLE USERS MANUAL
25
Starting computer number (Default: 1)
The “Starting computer number” defines to the system, the first CPU
port number for a particular UltraConsole switch that is configured in an
expanded topology. (See page 15)
Switch #1’s starting computer number is always 1.
Switch #2’s number is the total CPU ports on Unit #1 plus 1.
Switch #3’s number is the total CPU ports on Unit #1 and Unit #2 plus
1, and so forth.
To enter the “Starting computer” number use the up/down arrow keys
and select “Starting computer number” and press [Enter]. An input box
will display for a new starting computer number. Enter the new
“Starting computer” number and press [Enter].
Maximum computers
(Default: 64)
The “Maximum computers” value is calculated by counting the number
of CPU ports on all switches. This value must be entered from KVM
station #1 before all Units are connected in an expansion topology.
When saved, this value is propagated to all connected Units. To enter
the “Maximum computers” value, select it and press [Enter]. An input
box will display to enter the maximum computers value. Type in the
new value and press [Enter].
“Keyboard settings” selections.
PC keyboard rate (chars/sec) (Default: 20)
This option adjusts the KVM keyboard action when you hold down a
key to repeat a single character. Valid inputs are 1-31.
PC keyboard delay
(Default: Fast )
This option adjusts the delay between when a key is pressed and held
and when it begins to send repeated characters to the selected
computer.
The options are:
„
Slow
„
Medium
„
Fast
„
Fastest