manualshive.com logo in svg

Rose electronics UC1-1X16U/E, Инструкция по установке и эксплуатации

Поделиться
Скачать
Rose electronics UC1-1X16U/E Скачать руководство пользователя страница 56

 

50

 

ULTRACONSOLE USERS MANUAL 

 

You may receive one of the following errors during the file transfer 
function: checksum error, record error, or data error. These messages 
are followed by: 
 
 
 
These error messages may be caused by any of the following items: 

„

  Corrupted firmware upgrade file. 

„

  Loose or defective RS232 cable. 

„

  RS232 protocol not configured correctly. 

„

  Bad transmit or receive levels. 

„

  Hardware problem on transmit or receive side. 

 
 
 
 
 
 
Identify and correct the transmit problem and press “Y” and then [Enter] 
to try again and you can resend the file.  
 
Press “N” and then [Enter] and the prompt “Hit enter to boot “ appears. 
Press the [Enter] key to re-start the UltraConsole switches diagnostics 
with the firmware unchanged. 
 

Option 4. Send this Unit’s Main Program to other Units. 
Option 5. Send this Unit’s Kernel to other Units. 

The main program or kernel program updates (Option 3) only have to 
be done on one port.  Make sure power to all UltraConsole switches is 
“ON” and they are all connected using the appropriate expansion 
cables. 
 
Press 4 to send the main program to all other units, all other cards. 
Press 5 to send the kernel program to all other cards.  
The following messages will appear using either option 4 or option 5. 
 
Before responding Y, make sure that the “Boards to update” number in 
the message above agrees with the total number of boards in the entire 
system minus 1. If the number does not agree, reply N, turn on the 
inactive UltraConsole Units, and press 4 or 5 again. When you reply Y, 
the following message appears: 
 
 
 

Receive failed 
Try again Y/N 

Sending flash program code to system........................ 

Boards to update - n 
You are about to copy the firmware from this board to all other 
boards in the system. 
Are you sure? Y/N 

 

Содержание UC1-1X16U/E

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды